Compact. Versatile. Unstoppable

EnergyPack M300Pro
Industrial Mobile Hybrid BESS

 
 
 

A compact hybrid battery energy storage system delivering 400 kVA rated power, 600 kVA peak power for 10 seconds and 474.24 kWh of nominal battery capacity.

0 24 /7

FoxCloud Intelligent Management

0 <20ms

On/Off-Grid Switching

0 %+

Save Fuel Consumption

0 tons+

Reduce CO2 Emissions

Foxtheon EnergyPack M300 Pro industrial battery storage system

M300 /M300ProKey Specs

M300M300 Pro
Rated Power270 kVA400 kVA
Peak Power (Duration)352 kVA (10 s)600 kVA (10 s)
Nominal Battery Capacity522.4 kWh474.24 kWh
Enclosure8ft ISO Container8ft ISO Container
Cycle Life>7,000 cycles at 80% DoD, 70% EoL>8,000 cycles at 80% DoD, 70% EoL

How It Works

FoxMind™ EMS: The Intelligence Behind the Hardware

 

FoxMind™ EMS is the intelligent core of the M300, transforming complex energy dispatch into simple solutions aligned with your business objectives. You don’t need to be a power expert—just select your desired goal: save on electricity costs, reduce fuel consumption, or ensure critical power supply

One-Click Business Modes

off grid electricity

Stop Wasting Fuel on Low Loads

 

Generators are inefficient at low loads. FoxMind™ runs the genset only at its peak efficiency point to charge the batteries, then shuts it down.

Emergency Power Supply

Turn Intermittent Solar into Stable Power

 
 

Connect PV arrays directly to the EnergyPack M300. FoxMind™ buffers solar fluctuations, stores excess energy, and prioritizes clean power usage before starting the generator.

hybrid energy systems

Always-On Reliability

 

Functioning as a robust UPS, the M300 detects power loss and takes over in less than 20ms.

Typical Application Scenarios

Construction Site Offices

HVAC, lighting, and IT systems running 24/7 Provide clean, silent power for urban infrastructure projects

Utility & Microgrids

Stabilize local grids and integrate renewable energy (PV/Wind)

Event & Entertainment

Deliver high-capacity power for large-scale festivals without noise or emissions.

Mining & Remote Industry

Replace or supplement diesel generators in off-grid locations.

Field Hospitals & Clinics

Reliable, quiet power for sensitive environments.

M-Series Energy Storage System – Comparison Table

EnergyPack – M Series | Industrial Mobile Hybrid BESS

EnergyPack – M Series

Industrial Mobile Hybrid BESS

M150 / M150 Pro
EnergyPack M150
Power & Energy
  • Rated Power135 / 237 kVA
  • Peak Power200 kVA (3 s) / 300 kVA (10 s)
  • Energy261.2 / 237.12 kWh
Application & System
  • Best Foroff-grid site offices,Mobile sites, UPS, EV charging
  • Parallel UnitsUp to 16
  • EnclosureMobile trailer / skid
  • Thermal MgmtLiquid cooling
M300 / M300 Pro
EnergyPack M300
Power & Energy
  • Rated Power270 / 400 kVA
  • Peak Power352 kVA (10 s) / 600 kVA (10 s)
  • Energy522.4 / 474.24 kWh
Application & System
  • Best ForMicrogrids, mining camps
  • Parallel UnitsUp to 16
  • EnclosureISO 8-ft container
  • Thermal MgmtLiquid cooling
M600 / 600+
EnergyPack M600
Power & Energy
  • Rated Power675 kVA
  • Peak Power810 kVA (60 s) / 1,000 kVA (10 s)
  • Energy711.36 / 948.48 kWh
Application & System
  • Best ForLarge sites,Event, infrastructure
  • Parallel UnitsMW scalable
  • EnclosureISO 10-ft container
  • Thermal MgmtLiquid cooling
M900
EnergyPack M900
Power & Energy
  • Rated Power900 kVA
  • Peak Power1050 kVA (60s)
  • Energy948 kWh
Application & System
  • Best ForIndustrial mining & hubs
  • Parallel UnitsMW scalable
  • EnclosureISO 10-ft container
  • Thermal MgmtLiquid cooling

M300 Key Specs

Foxtheon EnergyPack M300 Pro industrial battery storage system
Nominal Rated Power (kVA)
270
Rated Voltage
400 VAC (configurable; −10% to +15%)
Peak Power (10 s) (kVA)
352
Cell chemistry
LiFePO4
Nominal capacity (kWh)
522.4 kWh
Frequency
50 (60) Hz
Operating Temperature
-20 to +50 °C
Power Factor Range
0 ind. …1 … 0 cap
System round trip efficiency (%)
up to 92.2%
AC Connection
3-Phase 4-Wire + PE
Battery management system
Automotive grade BMS
Temperature control
Liquid cooling / PI heating film
Nominal Rated Power (kVA)
400 kVA
Power Response Time
< 200 ms
Peak Power (10 s) (kVA)
600kVA
Cell chemistry
LiFePO4
Nominal capacity (kWh)
474.24 kWh
Effective capacity (kWh)
474.24 kWh (100% DoD)
System round trip efficiency (%)
up to 92.2%
Transport Compliance
CSC Certified (Convention for Safe Containers)
Battery management system
Industrial-grade BMS with cell-level monitoring
Temperature control
Liquid cooling / PI heating film

Ready to Hybridize Your Power?

 

Contact our engineers today to see how the M300 can reduce your carbon footprint and fuel costs.

M300 Pro Technical FAQ

How does the M300 Pro differ from the EnergyPack P300? +
The M300 Pro represents a major leap in high-density engineering. While utilizing a similar compact footprint, it delivers a high-performance 400 kVA rated power and a massive 474.24 kWh usable energy (100% DoD). It is equipped with an industrial-grade intelligent liquid cooling system and the FoxMind™ EMS, making it the "Pro" choice for demanding industrial microgrid orchestration.
Can it protect sensitive equipment during power transitions? +
Yes. The M300 Pro provides UPS-grade seamless switching (<20ms). This ensures that critical loads—such as data centers, servers, and hospital backups—remain uninterrupted during grid failures or transitions between energy sources.
What are the fuel optimization capabilities for off-grid sites? +
Utilizing FoxMind™ Fuel Saver Mode, the M300 Pro can reduce total energy costs by 30%–80%. It enables Silent Run by shutting down gensets during low-load periods and manages the generator to always operate within its optimal fuel-efficiency range.
Is the M300 Pro built for harsh mining or construction sites? +
Absolutely. It features an IP54-rated (IP65 optional) high-strength weathering steel canopy. With an operating range of -20°C to +50°C and UN 38.3 vibration resistance, it is specifically designed for the rugged conditions of Australian mining, remote infrastructure, and large-scale industrial sites.
Does it support third-party platform integration? +
The M300 Pro is an Open Energy Platform. It natively supports Modbus-TCP, MQTT, and CAN protocols, and provides a standard RESTful API. This allows seamless integration with your existing SCADA systems or asset management platforms for professional-grade fleet monitoring.

Please contact us for more information

Innovating for a Greener Onsite Energy

Get A Quote