Products / HybridPack
Foxtheon HybridPack
Hybrid Generators with Battery Storage
HybridPack combines diesel generation, battery storage and FoxMind controls in one unit for off-grid sites. The battery handles short demand peaks while the generator supports sustained loads.
HP400
HP1000Model selection
Compare HybridPack HP400 and HP1000
Choose against the load that must run continuously and the peaks that occur when equipment starts or cycles. The peak rating applies for a defined duration.
Variable loads on off-grid sites
Consider HP400 for construction equipment and remote industrial loads with intermittent surges. The HP400 rating book lists 120 kVA continuous, 350 kVA for 60 seconds and 400 kVA for 5 seconds.
View HP400 ratings and detailsHeavy-duty off-grid equipment
Consider HP1000 for high-demand industrial applications such as foundation piling, mining and oilfield projects. Confirm peak duration and sustained output for the project configuration.
View HP1000 model detailsFor both models, confirm continuous output, peak kVA and duration, usable battery energy, voltage and frequency for the site.
Operating modes
How HybridPack responds as demand changes
FoxMind coordinates the built-in diesel generator and battery according to site demand and available battery charge.
Low load
When demand is low and battery charge is sufficient, the battery can power suitable loads with the engine off.
Sustained load
The generator supplies ongoing demand and can recharge the battery when output is available.
Short peak
The battery can supplement the generator when equipment starts or load rises briefly.
See how HP1000 handles peak loads
See how the generator, battery and local EMS share demand when equipment starts or the site load changes.
▶How Hybrid Generators Handle Peak LoadsHP1000 engineering walkthrough · YouTubeApplications
Where integrated hybrid power fits
Heavy construction
Power sites with piling rigs, concrete pumps or other machinery that draws high current at startup.
Explore construction powerMining operations
Consider HybridPack for remote industrial sites with sustained demand and variable equipment loads.
Explore mining and remote powerOilfield projects
Assess continuous loads, motor starts and the daily operating schedule for sites that need their own generation.
Discuss your oilfield load profileField case
HybridPack for Construction Site Power

Two HP1000 units for a variable piling load
The project compared two HP1000 units with four 500 kVA diesel generators while powering piling rigs and concrete pumps. Foxtheon reported the following daily fuel consumption for this project.
Illustrative HP1000 photo from the case article.
Frequently asked questions
HybridPack operation and sizing
How is HybridPack different from EnergyPack?
HybridPack has built-in diesel generation and battery storage for sites that need an integrated power source. EnergyPack provides battery storage that can be paired with compatible external sources. Explore EnergyPack.
How much fuel can a hybrid generator save?
Fuel use depends on the load profile, engine runtime, battery dispatch and the diesel-only baseline. For a project estimate, compare both systems against the same load schedule and include fuel used to recharge the battery.
Can HybridPack handle motor starting loads?
The battery can supplement the generator during a short surge. Confirm the motor starting demand, how long it lasts, and whether several loads will start together before selecting HP400 or HP1000.
Can HybridPack work with solar?
Foxtheon describes renewable integration on its HybridPack product pages. Confirm the supported interfaces and configuration for the specific model and site before designing the connection.
Project sizing
Find the right HybridPack for your load
Share the equipment list, load schedule, largest starting surge and current diesel consumption with Foxtheon.
Discuss your site with Foxtheon →